What should I engrave on a multi-tool?

The engraving is entirely up to you. Depending on the intended recipient you can go with a nickname, name, special date, or design. For special occasions such as wedding gifts, consider our selection of custom multi-tools for groomsmen to spark your imagination.

How to sharpen engraved multi-tools?

You sharpen the blade of a multi-tool similarly to how you'd sharpen a knife. Choose a smaller sharpening stone that best matches your blade size and a finer grit for a sharper edge. Position the knife on a right angle and slide it outward until you are happy with the results. Serrated edges will require a bit more work as you need to sharpen each edge individually using a sharpening steel. For those blades that are both fine and serrated, you'll need to use the right tool for each section of the blade. Saws are the same as serrated blades. Some multi-tool brands will sell the blades separately for replacement, if yours doesn't though, use a small sharpening steel to get the job done. For sharp wire cutters that need sharpening (Blunt cutters do NOT need to be sharpened) you will need a straight and narrow sharpening steel.

Is the engraving durable?

The short answer is Yes! Laser etching on multi-tools are a permanent, smooth mark. The one caveat though is that as the multitool is used over several years, the metal itself may wear down which means the engraving may grow to be less bold over time. But again - this takes years of wear to happen!

How to clean an engraved multi-tool?

Keeping up with maintenance on your multi-tool will ensure it continues to be reliable for years. With so many moving parts, it’s important to keep a tidy tool. When you notice any debris, a great way to remove it is via compressed air. If you find some stubborn debris or dirt, go ahead and use something small - like a tooth pick - to get it out. Once done, be sure to apply a small drop of oil to keep your moving parts properly lubricated.

Custom Engraved Multi-Tools

Full size Custom Multi Tools

Engraved full sized multi-tools are oftentimes a must-have asset to keep in your pocket. Regardless of activity, having a reliable tool will go a long way in making sure you can keep going without needing to pause and grab a tool.

Leatherman Wave Plus

Price: $129.95 as low as $129.95

No Minimum Order Free Shipping Ships same day!

LMWAVE

Leatherman Super Tool 300

Price: $119.95 as low as $119.95

No Minimum Order Free Shipping Ships same day!

LMSUPERTOOL300

Engraved Gerber MP600 Needlenose Multi Tool

Price: $99.99 as low as $99.99

No Minimum Order Free Shipping Ships same day!

MTGMP600

Everyday carry and small size multi-tools

Engraved everyday carry (EDC) multi-tools can be a life-saver. Whether you’re at work, running errands, or sticking around the house, a compact, custom multi tool is sure to come in handy.

Gerber Dime Multitool

Price: $47.99 as low as $30.97

No Minimum Order Free Shipping Ships in 1-6 days

MTGDIME

Engraved Key Chain Key Tool - Bottle Opener, Cutter, Screwdriver, Wrench, Carabiner, Ruler

Price: $17.99 as low as $2.58

No Minimum Order Free Shipping Ships same day!

KCKT

Credit Card Wallet Multi-Tool

Price: $34.99 as low as $13.12

No Minimum Order Free Shipping Ships same day!

MTFMT

Custom outdoor and tactical multi-tools

When on the go, it helps to have a reliable tool on hand for the unknown. Our selection of custom outdoor and tactical multi-tools are sure to deliver.

Leatherman Signal

Price: $149.95 as low as $149.95

No Minimum Order Free Shipping Ships same day!

LMSIGNAL

MTGMP600

Personalized Gerber Armbar Drive

Price: $65.99 as low as $46.92

No Minimum Order Free Shipping Ships in 2-4 days

MTGABD

Best Selling Engraved Multi Tools

Not sure what you’re looking for? Check out these best-selling customized tools to get you started!

Leatherman Rebar

Price: $99.95 as low as $99.95

No Minimum Order Free Shipping Ships same day!

LMREBAR

Personalized Leatherman Raptor Rescue Shears

Price: $86.95 as low as $79.95

No Minimum Order Free Shipping Ships same day!

LMRAPTOR

MTFMT

Leatherman Skeletool CX

Price: $99.95 as low as $99.95

No Minimum Order Free Shipping Ships same day!

LMSKELETOOLCX

Custom Multitools with style

Looking for something with style? These engraved multi-tools are just what you need for a fully functional and aesthetically pleasing, cool looking tool.

LMSKELETOOLCX

MTFMT

FAQ

Frequently Asked Quesitons

What should I engrave on a multi-tool?: The engraving is entirely up to you. Depending on the intended recipient you can go with a nickname, name, special date, or design. For special occasions such as wedding gifts, consider our selection of custom multi-tools for groomsmen to spark your imagination.
How to sharpen engraved multi-tools?: You sharpen the blade of a multi-tool similarly to how you'd sharpen a knife. Choose a smaller sharpening stone that best matches your blade size and a finer grit for a sharper edge. Position the knife on a right angle and slide it outward until you are happy with the results.

Serrated edges will require a bit more work as you need to sharpen each edge individually using a sharpening steel. For those blades that are both fine and serrated, you'll need to use the right tool for each section of the blade.

Saws are the same as serrated blades. Some multi-tool brands will sell the blades separately for replacement, if yours doesn't though, use a small sharpening steel to get the job done.

For sharp wire cutters that need sharpening (Blunt cutters do NOT need to be sharpened) you will need a straight and narrow sharpening steel.
Is the engraving durable?: The short answer is Yes!
Laser etching on multi-tools are a permanent, smooth mark. The one caveat though is that as the multitool is used over several years, the metal itself may wear down which means the engraving may grow to be less bold over time. But again - this takes years of wear to happen!
How to clean an engraved multi-tool?: Keeping up with maintenance on your multi-tool will ensure it continues to be reliable for years.
With so many moving parts, it’s important to keep a tidy tool. When you notice any debris, a great way to remove it is via compressed air. If you find some stubborn debris or dirt, go ahead and use something small - like a tooth pick - to get it out.
Once done, be sure to apply a small drop of oil to keep your moving parts properly lubricated.

Browse Our Sub Categories

Custom Tape Measures

Small Size Multi Tools

Full-Sized Multi-Tools

Multi-Tools for Him

Multi-Tools for Her

Multi-Tools for Corporate Gifts

Engraved Gerber Multi-Tools

Military and LEO Multi-Tools

Multitools for Executives

Multi-Tools in Gift Sets

Best Selling Multi Tools

Engraved Leatherman Tools

How to Choose the Best Custom Multi Tool

Choosing the best custom multi tool requires considering several factors, such as its intended use, the quality of its components, and its design. Here are some tips to help you choose the right custom multi tool:

Determine Your Needs: Think about the tasks you will use the tool for, and what features you require. Do you need a blade, pliers, screwdrivers, scissors, or other tools? The more features you require, the larger and heavier the tool will be.
Quality: Consider the quality of the materials and the construction of the tool. Look for a custom multi tool made of high-quality stainless steel or other durable materials that can withstand daily use and abuse.
Size: Consider the size and weight of the tool. A small personalized multi tool may be easier to carry and store, but may not have all the features you need. A personalized full-size multi tool may have more features but may be too bulky to carry with you.
Design: Look for a custom multi tool with a comfortable grip that fits your hand well. The tool should be easy to open and close, and the individual components should be easy to access.
Brand: Choose a reputable brand that has a good reputation for quality and durability. Some of the best brands include custom Leatherman multitools and engraved Gerber multi tools
Cost: Consider the cost of the tool. A high-quality custom multi tool may seem out of your budget, but it may last longer and perform better than a cheaper alternative.

By considering these factors, you can choose the best custom multi tool that meets your needs and will last for years to come. With the inclusion of personalized laser engraving, you have a fantastic gift that will keep on giving.

How to Choose Engraved multi-tools?

Let's face it. Multi-tools are cool. The variety of uses in a single tool makes them beyond useful and a must-have. So how to choose an engraved multi-tool? With so many options, we can understand the hesitation.

How to choose an engraved multi-tool gift?

Who are you buying for? Is this family, friend, employee, co-worker?
What is the intended use? For work, home, or to pair up with enjoying a recreational activity like camping or fishing?
What types of tools would be really useful to the recipient?
Do you have a specific brand in mind, like Leatherman or Gerber?

The answers to just one of these questions will point you in the right direction of where to start your search!

Engraved multi tools are a popular and high-quality gift choice for good reason. The custom multi tool is convenient, compact and super easy to carry. A completely practical gift that keeps on giving for a lifetime.

With shiny finishes and tough build, these tools are designed for any kind of emergency, adventure or handy-man job. We have an enormous assortment of styles, designs and functions - for men and women!

We also have Multi Tool Gift Sets available for a deluxe gift choice.

Our laser engraving is free and we have no minimums. We can rush ship orders to meet your deadline with guaranteed delivery. No problem with large or special orders - you'll get them on time.

Laser engraving is a fine art that our technicians are incredibly skilled at. Our engraving process is permanent, deep and precise in the tiniest details of your design. Each engraving is guaranteed to come out flawless and artistic, just as you requested it.

We love engraving standard, fun, bold, rustic or sophisticated designs on our multi tools. So be creative as you consider your personalization.

Personalize these multi tools in various ways. Here are a few ideas to get you thinking:
-Name, date and special message for the recipient
-Creative artwork or design layout. Like your baby's footprints, signatures, romantic symbols, etc.
-Wedding date with the couple's names, date and personal message of thanks for attendance or service.
-Company name, logo or slogan for advertising your business

What occasion to give the multi tool on? Perfect for:
-Wedding favors
-Groomsmen and best man gifts
-Father's Day
-Graduation
-Retirement

These multi tools also make an awesome promotion item for events or recipients such as:
-giveaways for local events, tradeshows or festival
-employees
-clients (possible business too)
-closing gift and thanks to customers
-safety award
-appreciation
A personalized multi tool is a brilliant way to advertise your company and give a good first impression.

Whatever your ordering or engraving needs are, LazerDesigns has your back all the way. So let us make the road smooth and beautiful to stunningly personalized multi tools and pocket knives!