Spyderco Squeak Pink Handle 154 - 20% Off!

KNSP154PI Bookmark and Share
Spyderco Squeak Pink Handle 154 - 20% Off!
Click for larger image and other views
    Price: $59.00 to $59.00
    $59.00 each

    Discount Pricing (call for quote on higher quantities)

    1+
    $59.00

    Laser engraved Spyderco Knives - imagine the impact of your brand, permanently laser etched onto a brand like Spyderco! Your message combined with the quality of Spyderco knives will last for decades.

    Produced in Maniago, the Squeak SLIPIT is a Spyderco non-locking one-hand open, clip carry folder called a SLIPIT.  It's designed for legally-restricted carry in locales where locking folders are prohibited.

    The blade is ground full-flat and made from Austrian Bohler-Uddeholm's N690Co steel. N690C0 is high-carbon steel with added cobalt for structural uniformity resulting in enhanced edge retention and sharpening receptivity.  Textured jimping is machined from the blade's spine and choil for increased slip resistance.

    The Squeak's blade is held in the open position when cutting by a notched-joint at the knife's pivot.  When closing the blade, the notch generates resistance functionally similar to traditional slip-joint penknife and performs the additional function of smoothing the motion of the blade opening.  Increasing control and comfort Spyderco designers add a deep finger choil, naturally jogging the index finger into a position on the underside of the blade directly below the thumb.  Positioning the index finger in this choil blocks the blade from accidental closing when cutting and provides a grip position that allows the user to choke-up closer to the cutting edge for greater dexterity.

    The handle is FRN (fiberglass reinforced nylon) and engineered for user comfort whether in the hand, with ergonomic handle texturing, or in the pocket with a reversible tip-up deep pocket wire clip.

    • Great for groomsmen gifts, Father's Day gifts, safety awards, incentives and corporate gifts
    • LazerDesigns.com is an authorized dealer of Spyderco knives and all our engraving is backed by our Satisfaction Guarantee
    • Imagine how long your logo will be around when combined with the legendary and long lasting Spyderco knife!

    This knife is 20% off, only 1 left in stock! Regular price $73.00, now only $59!

    Information
    Item Code: KNSP154PI
    Decoration MethodLaser Etched (etching comes out black on stainless)
    Imprint Area: Blade: 1.25"w x 1/4"h (16-20 characters), 2 sides available, add $1
    Blade Length: 2 " (51 mm)
    Blade Material: N690Co steel
    Handle Material:  FRN (fiberglass reinforced nylon)
    Blade Thickness: .125 " (3 mm)
    Length Overall: 5.031 " (128 mm)
    Length Closed: 3.125 " (79 mm)
    Weight: 1.6 oz (46 g)
    Packaging: Spyderco Box or Stainless Gift Tin (add $3.25 for gift tin)
    Country of Origin: Italy
    Production Time: 3-5 business days
    (rush orders available on engraved Spyderco knives - more info)
    Shipping info: Actual shipping costs apply (available after add to basket)
    Setup Charges: None*

    Laser engraved Spyderco Knives - imagine the impact of your brand, permanently laser etched onto a brand like Spyderco! Your message combined with the quality of Spyderco knives will last for decades.

    Produced in Maniago, the Squeak SLIPIT is a Spyderco non-locking one-hand open, clip carry folder called a SLIPIT.  It's designed for legally-restricted carry in locales where locking folders are prohibited.

    The blade is ground full-flat and made from Austrian Bohler-Uddeholm's N690Co steel. N690C0 is high-carbon steel with added cobalt for structural uniformity resulting in enhanced edge retention and sharpening receptivity.  Textured jimping is machined from the blade's spine and choil for increased slip resistance.

    The Squeak's blade is held in the open position when cutting by a notched-joint at the knife's pivot.  When closing the blade, the notch generates resistance functionally similar to traditional slip-joint penknife and performs the additional function of smoothing the motion of the blade opening.  Increasing control and comfort Spyderco designers add a deep finger choil, naturally jogging the index finger into a position on the underside of the blade directly below the thumb.  Positioning the index finger in this choil blocks the blade from accidental closing when cutting and provides a grip position that allows the user to choke-up closer to the cutting edge for greater dexterity.

    The handle is FRN (fiberglass reinforced nylon) and engineered for user comfort whether in the hand, with ergonomic handle texturing, or in the pocket with a reversible tip-up deep pocket wire clip.

    Spyderco is very proud to support Guardians of the Ribbon/Pink Heals Tour and the "Cares Enough to Wear Pink" programs by donating a portion of the sales of our pink-handled knives.

    • Great for bridesmaid gifts, Mother's Day gifts, safety awards, incentives and corporate gifts
    • LazerDesigns.com is an authorized dealer of Spyderco knives and all our engraving is backed by our Satisfaction Guarantee
    • Imagine how long your logo will be around when combined with the legendary and long lasting Spyderco knife!

    Information
    Item Code: KNSP154PI
    Decoration MethodLaser Etched (etching comes out black on stainless)
    Imprint Area: Blade: 1.25"w x 1/4"h (16-20 characters), 2 sides available, add $1
    Blade Length: 2 " (51 mm)
    Blade Material: N690Co steel
    Handle Material:  FRN (fiberglass reinforced nylon)
    Blade Thickness: .125 " (3 mm)
    Length Overall: 5.031 " (128 mm)
    Length Closed: 3.125 " (79 mm)
    Weight: 1.6 oz (46 g)
    Packaging: Spyderco Box or Stainless Gift Tin (add $3.25 for gift tin)
    Country of Origin: Italy
    Production Time: 3-5 business days
    (rush orders available on engraved Spyderco knives - more info)
    Shipping info: Actual shipping costs apply (available after add to basket)
    Setup Charges: None*

    PERSONALIZE & BUY THIS PRODUCT


    Text, Logo or Both?

    Do you want to engrave text, your logo, or both?
    (Click here to learn how to send us your artwork)

    Sending us your Art

    The better the input artwork, the better the output marking!

    We accept most any types of artwork, however some will get you better results, and really low quality images will require make ready fees to clean up. Follow these guidelines to help your customized items look great!

    ACCEPTED FORMATS (listed in order of preference/quality)
    Vector Art (eps, ai, cdr, ps, fh, pdf)
    Illustrator, CorelDraw, Freehand, PDF's
    • Black and White High Resolution Camera Ready art
    • Raster images (tiff, jpg, png 300 dpi)
    • Layouts (Word, Excel, PowerPoint - only for layout guidance, not for logos. Send logos seperate in addition to your layout files)
    • Low quality raster images (gif, jpg, fuzzy, grainy, tiny may require make ready fee)

    PHOTOGRAPHS
    • Should be in as large a file as you have. Photos look best when there is a quite background (or no background) and less noise behind the object you want to laser
    (see examples http://www.lazerdesigns.com/custom-laser-photo-gallery.html)

    CLIPART
    • All our clipart is vector based, just send us the red code below the thumbnail to use on your item. View clipart gallery here. Have your own clipart? Just email it to us in as big crisp and clear a file as you have, or ideally, vector art.

    Fees: For camera ready artwork, there is no artwork fee. Camera ready artwork is considered a logo in 300dpi black and white tiff or EPS/AI/CDR files only. Images taken off websites are generally not camera ready.

    We have a Clipart Gallery available with over 7,000 images for you to choose from. Just mention the name in the Special Instructions field when ordering. There is no charge when using these images. (copy the red text under image & include with your order or email it to us)

    DEFAULTS
    If no artwork or font is chosen or sent in, we will DEFAULT the engraving to Arial Font and no logo. If there is no engraving info, we will send items blank.

    SENDING US YOUR ART
    Please send us your art immediately after you place your order to art@lazerdesigns.com and include your ORDER # in the Subject Line of email. Or, reply to the order confirmation you will receive and attach your logo.

    We need high quality, camera ready, high resolution or vector based artwork to ensure crisp and high quality lasering. We can clean-up and touch-up your art if it needs minor changes, however this can add to production time. We will always contact you before we charge you for Art Make Ready Fees.

    Wondering if your art will work? Just email it to us and let us know what you want to laser it on, and we'll tell you how it will work.

    FONTS
    See our available Fonts. Your font not there? Just include the name of the font you want, chances are we have it. If not, we'll let you know or you can embed the font in a vector based file (eps, ai, cdr, pdf) and email that to us.

    How can you tell if your logo will laser well?

    Remember: The better the input artwork, the better the output engraving!

    If you have a VECTOR file (EPS, AI, PDF, CDR) this is almost always the BEST OPTION!

    Photographs should be in as large a file as you have.
    Photos look best when there is a quiet background (or solid color in background)

    If you have a VECTOR file (EPS, AI, PDF, CDR) this is almost always the BEST OPTION!

    Please send us your logo in one of the following formats, and remember to include your Order Number with all correspondence.

    Low quality image
    This image is LOW quality, and would not laser as well as a higher resolution image. The jagged edges may come across when lasered.
    High quality image This image is higher quality, with crisp edges, and would laser well

    Can't find a high quality image? Send us what you have, our skilled art team will see if we can work with it!

    If you have a VECTOR file (EPS, AI, PDF, CDR) this is almost always the BEST OPTION!

    Not sure? Email your logo to us ahead of time and we'll take a look and provide any tips and feedback. Please tell us what you want to engrave it on.

    We will always contact you before we charge you any additional fees. We are experts with cleaning up artwork and often there is no charge.

    We can also engrave your photographs! See example of engraved photographs.

    TRADEMARKS/COPYRIGHTS
    Customers will assume complete responsibility to obtain permission for reproduction of logos, trademarks & copyrights. By agreeing to print any submitted artwork, Lazer Designs will not be held liable under any circumstances.

    Please call or e-mail with any questions or if you would like a quote on your artwork!

    Use the Special Instructions Box to describe your custom layout if needed.

    Ready to send your logo? Click here to start email, wait to send it until you have an order number
    Want it blank? Just skip the rest of the questions
    Choose a font

    Choose what font you want it lasered in. View More Fonts
    Fonts may look different when laser engraved. On most items, the largest text can get is 10-16pt. On larger items (ie, pen sets or awards) font size can be larger. When possible, we generally recommend bolding the font.
    MOST POPULAR


    FUN


    WEDDINGS/FORMAL


    MILITARY

    FONT PREVIEWER

    ALL AROUND


    BUSINESS


    RELIGIOUS/ACADEMIC

    We can laser engrave with any font you like, or just choose from our selection above.

    • Please keep these things in mind:
    • Fonts that look best are smooth and full.
    • Some cursive fonts or really fancy fonts won't look good on smaller items (and some will look great on larger surfaces).



    Location

    Choose a location

    Special Instructions

    Here please tell us any special instructions, including what fonts you want, artwork info, engraving info, or what you want on the second side, individual names to be engraved on different items, etc.



    1+
    $59.00
    $59.00
    $59.00 each
    Quantity: