Get FREE SHIPPING, use rate code FREESHIP14 when checking out! (Applies to Ground Shipping. Click here for more details.) Hurry, expires Oct. 24!



Spyderco Squeak Pink Handle 154

KNSP154PI Bookmark and Share
Price: $73.00 to $52.59
$73.00 each


Discount Pricing

1-5 6-11 12-23 24-49 50-99
$73.00 $67.42 $60.68 $59.78 $56.19
100+
$52.59

Laser engraved Spyderco Knives - imagine the impact of your brand, permanently laser etched onto a brand like Spyderco! Your message combined with the quality of Spyderco knives will last for decades.

Produced in Maniago, the Squeak SLIPIT is a Spyderco non-locking one-hand open, clip carry folder called a SLIPIT.  It's designed for legally-restricted carry in locales where locking folders are prohibited.

The blade is ground full-flat and made from Austrian Bohler-Uddeholm's N690Co steel. N690C0 is high-carbon steel with added cobalt for structural uniformity resulting in enhanced edge retention and sharpening receptivity.  Textured jimping is machined from the blade's spine and choil for increased slip resistance.

The Squeak's blade is held in the open position when cutting by a notched-joint at the knife's pivot.  When closing the blade, the notch generates resistance functionally similar to traditional slip-joint penknife and performs the additional function of smoothing the motion of the blade opening.  Increasing control and comfort Spyderco designers add a deep finger choil, naturally jogging the index finger into a position on the underside of the blade directly below the thumb.  Positioning the index finger in this choil blocks the blade from accidental closing when cutting and provides a grip position that allows the user to choke-up closer to the cutting edge for greater dexterity.

The handle is FRN (fiberglass reinforced nylon) and engineered for user comfort whether in the hand, with ergonomic handle texturing, or in the pocket with a reversible tip-up deep pocket wire clip.

  • Great for groomsmen gifts, Father's Day gifts, safety awards, incentives and corporate gifts
  • LazerDesigns.com is an authorized dealer of Spyderco knives and all our engraving is backed by our Satisfaction Guarantee
  • Imagine how long your logo will be around when combined with the legendary and long lasting Spyderco knife!

Information
Item Code: KNSP154PI
Decoration MethodLaser Etched (etching comes out black on stainless)
Imprint Area: Blade: 1.25"w x 1/4"h (16-20 characters), 2 sides available, add $1
Blade Length: 2 " (51 mm)
Blade Material: N690Co steel
Handle Material:  FRN (fiberglass reinforced nylon)
Blade Thickness: .125 " (3 mm)
Length Overall: 5.031 " (128 mm)
Length Closed: 3.125 " (79 mm)
Weight: 1.6 oz (46 g)
Packaging: Spyderco Box or Stainless Gift Tin (add $3.25 for gift tin)
Country of Origin: Italy
Production Time: 3-5 business days
(rush orders available on engraved Spyderco knives - more info)
Shipping info: Actual shipping costs apply (available after add to basket)
Setup Charges: None*

Laser engraved Spyderco Knives - imagine the impact of your brand, permanently laser etched onto a brand like Spyderco! Your message combined with the quality of Spyderco knives will last for decades.

Produced in Maniago, the Squeak SLIPIT is a Spyderco non-locking one-hand open, clip carry folder called a SLIPIT.  It's designed for legally-restricted carry in locales where locking folders are prohibited.

The blade is ground full-flat and made from Austrian Bohler-Uddeholm's N690Co steel. N690C0 is high-carbon steel with added cobalt for structural uniformity resulting in enhanced edge retention and sharpening receptivity.  Textured jimping is machined from the blade's spine and choil for increased slip resistance.

The Squeak's blade is held in the open position when cutting by a notched-joint at the knife's pivot.  When closing the blade, the notch generates resistance functionally similar to traditional slip-joint penknife and performs the additional function of smoothing the motion of the blade opening.  Increasing control and comfort Spyderco designers add a deep finger choil, naturally jogging the index finger into a position on the underside of the blade directly below the thumb.  Positioning the index finger in this choil blocks the blade from accidental closing when cutting and provides a grip position that allows the user to choke-up closer to the cutting edge for greater dexterity.

The handle is FRN (fiberglass reinforced nylon) and engineered for user comfort whether in the hand, with ergonomic handle texturing, or in the pocket with a reversible tip-up deep pocket wire clip.

Spyderco is very proud to support Guardians of the Ribbon/Pink Heals Tour and the "Cares Enough to Wear Pink" programs by donating a portion of the sales of our pink-handled knives.

  • Great for bridesmaid gifts, Mother's Day gifts, safety awards, incentives and corporate gifts
  • LazerDesigns.com is an authorized dealer of Spyderco knives and all our engraving is backed by our Satisfaction Guarantee
  • Imagine how long your logo will be around when combined with the legendary and long lasting Spyderco knife!

Information
Item Code: KNSP154PI
Decoration MethodLaser Etched (etching comes out black on stainless)
Imprint Area: Blade: 1.25"w x 1/4"h (16-20 characters), 2 sides available, add $1
Blade Length: 2 " (51 mm)
Blade Material: N690Co steel
Handle Material:  FRN (fiberglass reinforced nylon)
Blade Thickness: .125 " (3 mm)
Length Overall: 5.031 " (128 mm)
Length Closed: 3.125 " (79 mm)
Weight: 1.6 oz (46 g)
Packaging: Spyderco Box or Stainless Gift Tin (add $3.25 for gift tin)
Country of Origin: Italy
Production Time: 3-5 business days
(rush orders available on engraved Spyderco knives - more info)
Shipping info: Actual shipping costs apply (available after add to basket)
Setup Charges: None*

Average Customer Review: Not yet rated
Write an online review and share your thoughts with others.

There are no reviews

PERSONALIZE & BUY THIS PRODUCT


Text, Logo or Both?

Do you want to engrave text, your logo, or both?
(Click here to learn how to send us your artwork)
Use the Special Instructions Box to describe your custom layout if needed.

Ready to send your logo? Click here to start email, wait to send it until you have an order number
Want it blank? Just skip the rest of the questions
Choose a font

Choose what font you want it lasered in.


Location

Choose a location

Packaging

personalized spyderco packaging custom spyderco packaging
Standard slide-out box, or the ultimate in presentation, a 2-piece Black Gift Box with the Spyderco nestled in crinkle paper (add $3.25 each, click to enlarge photo)

Special Instructions

Here please tell us any special instructions, including what fonts you want, artwork info, engraving info, or what you want on the second side, individual names to be engraved on different items, etc.



1-5 6-11 12-23 24-49 50-99
$73.00 $67.42 $60.68 $59.78 $56.19
100+
$52.59
$73.00
$73.00 each
Quantity: